很多考生關注2023上半年系統分析師上午真題答案，希賽小編整理了網友回憶版2023上半年系統分析師上午真題（71-75），完整版真題可在本文文首或文末本文資料處下載。答案解析請考生關注希賽真題公開課。

71、Safety cntical systos are syste me in which failures may affect the environment of the esem ard cwse injury or desth to the people in that environment. The principal conce of sntty specificetion is to fdentily requir ements that will minimize the probability that su eetem fhiur es will occur. Safely requirements are primarily protection requirements and are es oorcened with nome1 system operation. They may specify that the system should be shu deym so that wafely is maintained. in deriving safety requirements. you. therefore, need to fin at acceptable balance between safety and functionality and avoid overprotection. There is auint in banking a very safe system if it does not operate in a cost-effective way.Safery specification is usually focused on the hazards that may arise in a given situation, and the events that can lead to these hazards. The activities in the general risk -based ication process. map onto the safety specification process as follows.1.( ).In safery specification, this is the hazard identification process that identifies hazards that may threaten the system.2( ).This is a process of hazard assessment to decide which hazards are the most dangerous and or the most likely to occur. These should be prioritized when deriving safety regurements.3.( ).This process is concerned with discovering the events that can lead to the accurrence of a hazard. In safety specific ation, the process is known as hazard analysis.4.( ).This process is based on the outcome of(75)and leads to identification of safety requirements. These may be concer ned with ensuring that a hazard does not arise or iead to an accident or that if an accident does occur.the associated damage is minimized.

問題1

A、Risk decomposition

B、Risk analysis

C、Risk reduction

D、Risk identification

問題2

A、Risk decomposition

B、Risk analysis

C、Risk reduction

D、Risk identification

問題3

A、Risk decomposition

B、Risk specification

C、Risk reduction

D、Risk identification

問題4

A、Risk decomposition

B、Risk analysis

C、Risk reduction

D、Risk identification

問題5

A、hazard identification

B、hazard assessment

C、safety specification

D、hazard analysis